|
We
are an approved installer for Munters (UK). Backed by an outstanding
team of Munters engineers we can provide some of the best dehumidification
systems in the UK. We can supply and install all the necessary items
required to complete the Munters package.
Munters
products have been installed for a huge variety of both customers
and applications. Please see the table below for examples. Should
you have any questions please call, if we do not have the answer
then we can put you onto the person that does.
THE
BASIC PRINCIPLES
The Munters Desiccant Rotor
The basic idea of the Munters Desiccant Rotor is very simple:
Air is blown though the rotor structure and the humidity in the
air is absorbed by the desiccant.
The air leaves the rotor as Dry Air.
The
drive motor turns the rotor around slowly (6-10 times an hour).
The rotor structure passes a seperate sector where hot (reactiviation)
air is blown through the rotor to remove the accumulated moisture.
The resulting wet air (which contains the removed moisture) is blown
away outside.
The
rotor consists of a corrugated fiberglass structure, which contains
a hygroscopic material (desiccants such as silicagel or lithium-chloride)
.

The
system only has a few moving parts: one or two fans and a drive
motor. No freon, no compressor.
COMMON HUMIDITY PROBLEMS
- Bacterial
growth
- Chemical
reactions prevention
- Condensation
- Corrosion
- Electronic
failure
- Human
comfort (optimise indoor environment)
- Ice
build up
- Moisture
absorption prevention
- Mould
/ Fungus
- Optimise
conveying of powders
- Optimise
mechanical properties
- Optimise
product coating
- Product
drying
- Product
sticking / caking
- VOC
abatement
|
INDUSTRIES
WHERE USED
- Archives
and Museums
- Automotive
- Chemical
- Consulting
Engineers
- Defence
- Electronics
& Semi-conductors
- Food
- Household
- Other
- Pharmaceutical
- Power
Generation
- Recreation
& Leisure
- Retail
& Wholesales
- Shipbuilding
and Marine
- Water
& Waste water
- Water
Damage Restoration
|
|